Alma Violin Sound Post Corelli CO-A4 Corelli Acc Inst Cuerdas - Alma Violin Parte Número: 11166160 - Modelo: COA4 Ver Todos: Alma Violin - Corelli Enlaces externos: web   Hacer una pregunta sobre este producto Detalles Placement

Soundpost Placement
There are two crucial distances in the placement of the spruce sound post.
The first is the relationship of the soundpost to the bass bar. The soundpost and bass bar are usually equidistant from the respective edge of bridge foot. This measurement can be made with a cut business card.
The balance of the strings is affected by this distance.
If the post is moved to the right, the E-string becomes strong. When moved to the left, the G-string becomes strong leaving the E-string weak.
The second measurement is the distance of the soundpost from the backside of the bridge foot.
This distance is usually 1/2 the width of the bridge foot , or, 1/2 the width of the soundpost.
Distance between edge of foot and bass bar (4/4 size)
Violin 1.0 - 1.5mm
Viola 1.5 - 2.0mm
Cello 3.5 - 5.0mm
Soundpost Placement
This second measurement greatly influences tonal qualities.
When the post is positioned close to the bridge, the sound becomes bright and stiff. When placed further from the bridge, the sound becomes softer and darker.
Distance of back of bridge to soundpost (4/4 size)
Violin 2.0 - 2.5mm
Viola 3.0 - 3.5mm
Cello 5.0 - 6.0mm
These measurements are the traditional beginning place for tonal adjustment.
Cutting and Setting the Soundpost

Humidity, seasonal changes, or a poorly cut soundpost can affect the fit, or tension.
If the post is too long or tight, the sound will be choked, harsh and stiff.
If it is too short or loose, the sound will be muffled and shallow.
Setting the SoundpostThe angle, contact, fit and grain of the soundpost are critical to the full transference of sound and tonal qualities of the instrument.
Setting the Soundpost
The post must stand straight and be cut to have full surface contact with both top and bottom plates.
Setting the Soundpost
The soundpost grains must run perpendicular to the grains of the top plate.
At Southwest Strings, all soundposts are professionally carved and correctly placed to maximize sound quality.